Incoloy 800/800H/800HT tube UNS N08800/N08810/N08811 nickel alloy seamless pipe/tube
Standard: ASTM/ASME B/SB 163,ASTM /ASME B/SB407
Material: Incoloy800/800H/800HT,825, Inconel 600,601,625,617,690,693, Monel 400, Monel K500, Alloy20,Alloy28. Hastelloy C276,AL6XN,N08028 etc.
| UNS N08800/N08810/N08811 Chemical Composition% |
| Alloy Designation | Element | C | Ni | Cr | Mn | Fe | Si | Cu | Al | Ti | S |
| Incoloy 800 | Min. % | - | 30 | 19 | - | 39.5 | - | - | 0.15 | 0.15 | - |
| Max. % | 0.1 | 35 | 23 | 1.5 | - | 1 | 0.75 | 0.6 | 0.6 | 0.015 |
| Incoloy800H | Min. % | 0.05 | 30 | 19 | - | 39.5 | - | - | 0.15 | 0.15 | - |
| Max. % | 0.1 | 35 | 23 | 1.5 | - | 1 | 0.75 | 0.6 | 0.6 | 0.015 |
| Incoloy800HT | Min. % | 0.06 | 30 | 19 | - | 39.5 | - | - | 0.15 | 0.15 | - |
| Max. % | 0.1 | 35 | 23 | 1.5 | - | 1 | 0.75 | 0.6 | 0.6 | 0.015 |
| Mechanical Propeties | Incoloy 800 | Incoloy 800H | incoloy 800HT |
| Density: | 7.9g/cm3 | 7.9g/cm3 | 7.9g/cm3 |
| Melting Point: | 1350-1400°c | 1350-1400°c | 1350-1400°c |
| Tensile Strength Min.(Mpa): | 520 | 450 | 450 |
| Yield Strength Min. (MPa): 0.2% offset | 205 | 170 | 170 |
| Elongation A 5%(min.): | 30 | 30 | 30 |
| Rockwell Hardness Max.: | B95 | B95 | B95 |
01) Commodity name: Seamless and welded austenitic stainless steel pipe
02) Process method: Cold drawn/cold pilgered
03) Surface finish: Annealed/cold pilgered/manual polished/mechanical polished
04) Material: 904L, 800h
05) Standards: ASTM (ASME) A 790/ A 790M
06) Size:
A) O. D.: 19mm to 168mm
B) W. T.: Customized
07) Length: Max. 12 meters
08) Delivery conditions: Solution annealed, pickled, grey white, with plain ends or beveled end
09) Applications: For heater exchanger, condenser
10) Packing: Plastic bags for each piece then packed in seaworthy wooden cases or iron crates
11) Min order quantity: 1 metric ton or upon negotiation
12) Delivery date: Min. 45 days
Nominal Dia: 1/2 "to 10" NB for seamless pipe
Schedules: 5S, 10S, 40S, 80S, 10, 20, 30...120, 140, 160, XXS
All dimensions are in accordance with ANSI B36.19 and ANSI B36.10
Size Range for tubing: OD:1/4" (6.25mm) to 8" (203mm), WT 0.02" (0.5mm) to 0.5"(12mm)
Length:30 m(Max) or as your requirement
Process:
Cold drawn, Cold rolled, Precision Rolled for Seamless Pipe or Tube
Finish: Annealed & pickled, bright annealing, polished
Ends: Beveled or plain end, square cut, burr free ,Plastic Cap at Both end
Packing: Bare packing/bundle packing with woven bag/wooden or steel frame crate packing/plastic cap protection at the both sides of tubes and suitably protected for sea-worthly delivery or as requested.
